Creating a cluster with kubeadm

Using kubeadm, you can create a minimum viable Kubernetes cluster that conforms to best practices. In fact, you can use kubeadm to set up a cluster that will pass the Kubernetes Conformance tests. kubeadm also supports other cluster lifecycle functions, such as bootstrap tokens and cluster upgrades.

The kubeadm tool is good if you need:

A simple way for you to try out Kubernetes, possibly for the first time.
A way for existing users to automate setting up a cluster and test their application.
A building block in other ecosystem and/or installer tools with a larger scope.

You can install and use kubeadm on various machines: your laptop, a set of cloud servers, a Raspberry Pi, and more. Whether you're deploying into the cloud or on-premises, you can integrate kubeadm into provisioning systems such as Ansible or Terraform.

Before you begin

To follow this guide, you need:

One or more machines running a deb/rpm-compatible Linux OS; for example: Ubuntu or CentOS.
2 GiB or more of RAM per machine--any less leaves little room for your apps.
At least 2 CPUs on the machine that you use as a control-plane node.
Full network connectivity among all machines in the cluster. You can use either a public or a private network.

You also need to use a version of kubeadm that can deploy the version of Kubernetes that you want to use in your new cluster.

Kubernetes' version and version skew support policy applies to kubeadm as well as to Kubernetes overall. Check that policy to learn about what versions of Kubernetes and kubeadm are supported. This page is written for Kubernetes v1.29.

The kubeadm tool's overall feature state is General Availability (GA). Some sub-features are still under active development. The implementation of creating the cluster may change slightly as the tool evolves, but the overall implementation should be pretty stable.

Note: Any commands under kubeadm alpha are, by definition, supported on an alpha level.

Objectives

Install a single control-plane Kubernetes cluster
Install a Pod network on the cluster so that your Pods can talk to each other

Instructions

Preparing the hosts

Component installation

Install a container runtime and kubeadm on all the hosts. For detailed instructions and other prerequisites, see Installing kubeadm.

Note:

If you have already installed kubeadm, see the first two steps of the Upgrading Linux nodes document for instructions on how to upgrade kubeadm.

When you upgrade, the kubelet restarts every few seconds as it waits in a crashloop for kubeadm to tell it what to do. This crashloop is expected and normal. After you initialize your control-plane, the kubelet runs normally.

Network setup

kubeadm similarly to other Kubernetes components tries to find a usable IP on the network interfaces associated with a default gateway on a host. Such an IP is then used for the advertising and/or listening performed by a component.

To find out what this IP is on a Linux host you can use:

ip route show # Look for a line starting with "default via"

Note: If two or more default gateways are present on the host, a Kubernetes component will try to use the first one it encounters that has a suitable global unicast IP address. While making this choice, the exact ordering of gateways might vary between different operating systems and kernel versions.

Kubernetes components do not accept custom network interface as an option, therefore a custom IP address must be passed as a flag to all components instances that need such a custom configuration.

Note: If the host does not have a default gateway and if a custom IP address is not passed to a Kubernetes component, the component may exit with an error.

To configure the API server advertise address for control plane nodes created with both init and join, the flag --apiserver-advertise-address can be used. Preferably, this option can be set in the kubeadm API as InitConfiguration.localAPIEndpoint and JoinConfiguration.controlPlane.localAPIEndpoint.

For kubelets on all nodes, the --node-ip option can be passed in .nodeRegistration.kubeletExtraArgs inside a kubeadm configuration file (InitConfiguration or JoinConfiguration).

For dual-stack see Dual-stack support with kubeadm.

The IP addresses that you assign to control plane components become part of their X.509 certificates' subject alternative name fields. Changing these IP addresses would require signing new certificates and restarting the affected components, so that the change in certificate files is reflected. See Manual certificate renewal for more details on this topic.

Warning: The Kubernetes project recommends against this approach (configuring all component instances with custom IP addresses). Instead, the Kubernetes maintainers recommend to setup the host network, so that the default gateway IP is the one that Kubernetes components auto-detect and use. On Linux nodes, you can use commands such as ip route to configure networking; your operating system might also provide higher level network management tools. If your node's default gateway is a public IP address, you should configure packet filtering or other security measures that protect the nodes and your cluster.

Preparing the required container images

This step is optional and only applies in case you wish kubeadm init and kubeadm join to not download the default container images which are hosted at registry.k8s.io.

Kubeadm has commands that can help you pre-pull the required images when creating a cluster without an internet connection on its nodes. See Running kubeadm without an internet connection for more details.

Kubeadm allows you to use a custom image repository for the required images. See Using custom images for more details.

Initializing your control-plane node

The control-plane node is the machine where the control plane components run, including etcd (the cluster database) and the API Server (which the kubectl command line tool communicates with).

(Recommended) If you have plans to upgrade this single control-plane kubeadm cluster to high availability you should specify the --control-plane-endpoint to set the shared endpoint for all control-plane nodes. Such an endpoint can be either a DNS name or an IP address of a load-balancer.
Choose a Pod network add-on, and verify whether it requires any arguments to be passed to kubeadm init. Depending on which third-party provider you choose, you might need to set the --pod-network-cidr to a provider-specific value. See Installing a Pod network add-on.
(Optional) kubeadm tries to detect the container runtime by using a list of well known endpoints. To use different container runtime or if there are more than one installed on the provisioned node, specify the --cri-socket argument to kubeadm. See Installing a runtime.

To initialize the control-plane node run:

kubeadm init <args>

Considerations about apiserver-advertise-address and ControlPlaneEndpoint

While --apiserver-advertise-address can be used to set the advertise address for this particular control-plane node's API server, --control-plane-endpoint can be used to set the shared endpoint for all control-plane nodes.

--control-plane-endpoint allows both IP addresses and DNS names that can map to IP addresses. Please contact your network administrator to evaluate possible solutions with respect to such mapping.

Here is an example mapping:

192.168.0.102 cluster-endpoint

Where 192.168.0.102 is the IP address of this node and cluster-endpoint is a custom DNS name that maps to this IP. This will allow you to pass --control-plane-endpoint=cluster-endpoint to kubeadm init and pass the same DNS name to kubeadm join. Later you can modify cluster-endpoint to point to the address of your load-balancer in an high availability scenario.

Turning a single control plane cluster created without --control-plane-endpoint into a highly available cluster is not supported by kubeadm.

More information

For more information about kubeadm init arguments, see the kubeadm reference guide.

To configure kubeadm init with a configuration file see Using kubeadm init with a configuration file.

To customize control plane components, including optional IPv6 assignment to liveness probe for control plane components and etcd server, provide extra arguments to each component as documented in custom arguments.

To reconfigure a cluster that has already been created see Reconfiguring a kubeadm cluster.

To run kubeadm init again, you must first tear down the cluster.

If you join a node with a different architecture to your cluster, make sure that your deployed DaemonSets have container image support for this architecture.

kubeadm init first runs a series of prechecks to ensure that the machine is ready to run Kubernetes. These prechecks expose warnings and exit on errors. kubeadm init then downloads and installs the cluster control plane components. This may take several minutes. After it finishes you should see:

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a Pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  /docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join <control-plane-host>:<control-plane-port> --token <token> --discovery-token-ca-cert-hash sha256:<hash>

To make kubectl work for your non-root user, run these commands, which are also part of the kubeadm init output:

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

export KUBECONFIG=/etc/kubernetes/admin.conf

Warning:

The kubeconfig file admin.conf that kubeadm init generates contains a certificate with Subject: O = kubeadm:cluster-admins, CN = kubernetes-admin. The group kubeadm:cluster-admins is bound to the built-in cluster-admin ClusterRole. Do not share the admin.conf file with anyone.

kubeadm init generates another kubeconfig file super-admin.conf that contains a certificate with Subject: O = system:masters, CN = kubernetes-super-admin. system:masters is a break-glass, super user group that bypasses the authorization layer (for example RBAC). Do not share the super-admin.conf file with anyone. It is recommended to move the file to a safe location.

See Generating kubeconfig files for additional users on how to use kubeadm kubeconfig user to generate kubeconfig files for additional users.

Make a record of the kubeadm join command that kubeadm init outputs. You need this command to join nodes to your cluster.

The token is used for mutual authentication between the control-plane node and the joining nodes. The token included here is secret. Keep it safe, because anyone with this token can add authenticated nodes to your cluster. These tokens can be listed, created, and deleted with the kubeadm token command. See the kubeadm reference guide.

Installing a Pod network add-on

Caution:

This section contains important information about networking setup and deployment order. Read all of this advice carefully before proceeding.

You must deploy a Container Network Interface (CNI) based Pod network add-on so that your Pods can communicate with each other. Cluster DNS (CoreDNS) will not start up before a network is installed.

Take care that your Pod network must not overlap with any of the host networks: you are likely to see problems if there is any overlap. (If you find a collision between your network plugin's preferred Pod network and some of your host networks, you should think of a suitable CIDR block to use instead, then use that during kubeadm init with --pod-network-cidr and as a replacement in your network plugin's YAML).
By default, kubeadm sets up your cluster to use and enforce use of RBAC (role based access control). Make sure that your Pod network plugin supports RBAC, and so do any manifests that you use to deploy it.
If you want to use IPv6--either dual-stack, or single-stack IPv6 only networking--for your cluster, make sure that your Pod network plugin supports IPv6. IPv6 support was added to CNI in v0.6.0.

Note: Kubeadm should be CNI agnostic and the validation of CNI providers is out of the scope of our current e2e testing. If you find an issue related to a CNI plugin you should log a ticket in its respective issue tracker instead of the kubeadm or kubernetes issue trackers.

Several external projects provide Kubernetes Pod networks using CNI, some of which also support Network Policy.

See a list of add-ons that implement the Kubernetes networking model.

You can install a Pod network add-on with the following command on the control-plane node or a node that has the kubeconfig credentials:

kubectl apply -f <add-on.yaml>

You can install only one Pod network per cluster.

Once a Pod network has been installed, you can confirm that it is working by checking that the CoreDNS Pod is Running in the output of kubectl get pods --all-namespaces. And once the CoreDNS Pod is up and running, you can continue by joining your nodes.

If your network is not working or CoreDNS is not in the Running state, check out the troubleshooting guide for kubeadm.

Managed node labels

By default, kubeadm enables the NodeRestriction admission controller that restricts what labels can be self-applied by kubelets on node registration. The admission controller documentation covers what labels are permitted to be used with the kubelet --node-labels option. The node-role.kubernetes.io/control-plane label is such a restricted label and kubeadm manually applies it using a privileged client after a node has been created. To do that manually you can do the same by using kubectl label and ensure it is using a privileged kubeconfig such as the kubeadm managed /etc/kubernetes/admin.conf.

Control plane node isolation

By default, your cluster will not schedule Pods on the control plane nodes for security reasons. If you want to be able to schedule Pods on the control plane nodes, for example for a single machine Kubernetes cluster, run:

kubectl taint nodes --all node-role.kubernetes.io/control-plane-

The output will look something like:

node "test-01" untainted
...

This will remove the node-role.kubernetes.io/control-plane:NoSchedule taint from any nodes that have it, including the control plane nodes, meaning that the scheduler will then be able to schedule Pods everywhere.

Joining your nodes

The nodes are where your workloads (containers and Pods, etc) run. To add new nodes to your cluster do the following for each machine:

SSH to the machine
Become root (e.g. sudo su -)
Install a runtime if needed

Run the command that was output by kubeadm init. For example:

kubeadm join --token <token> <control-plane-host>:<control-plane-port> --discovery-token-ca-cert-hash sha256:<hash>

If you do not have the token, you can get it by running the following command on the control-plane node:

kubeadm token list

The output is similar to this:

TOKEN                    TTL  EXPIRES              USAGES           DESCRIPTION            EXTRA GROUPS
8ewj1p.9r9hcjoqgajrj4gi  23h  2018-06-12T02:51:28Z authentication,  The default bootstrap  system:
                                                   signing          token generated by     bootstrappers:
                                                                    'kubeadm init'.        kubeadm:
                                                                                           default-node-token

By default, tokens expire after 24 hours. If you are joining a node to the cluster after the current token has expired, you can create a new token by running the following command on the control-plane node:

kubeadm token create

The output is similar to this:

5didvk.d09sbcov8ph2amjw

If you don't have the value of --discovery-token-ca-cert-hash, you can get it by running the following command chain on the control-plane node:

openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | \
   openssl dgst -sha256 -hex | sed 's/^.* //'

The output is similar to:

8cb2de97839780a412b93877f8507ad6c94f73add17d5d7058e91741c9d5ec78

Note: To specify an IPv6 tuple for <control-plane-host>:<control-plane-port>, IPv6 address must be enclosed in square brackets, for example: [2001:db8::101]:2073.

The output should look something like:

[preflight] Running pre-flight checks

... (log output of join workflow) ...

Node join complete:
* Certificate signing request sent to control-plane and response
  received.
* Kubelet informed of new secure connection details.

Run 'kubectl get nodes' on control-plane to see this machine join.

A few seconds later, you should notice this node in the output from kubectl get nodes when run on the control-plane node.

Note: As the cluster nodes are usually initialized sequentially, the CoreDNS Pods are likely to all run on the first control-plane node. To provide higher availability, please rebalance the CoreDNS Pods with kubectl -n kube-system rollout restart deployment coredns after at least one new node is joined.

(Optional) Controlling your cluster from machines other than the control-plane node

In order to get a kubectl on some other computer (e.g. laptop) to talk to your cluster, you need to copy the administrator kubeconfig file from your control-plane node to your workstation like this:

scp root@<control-plane-host>:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf get nodes

Note:

The example above assumes SSH access is enabled for root. If that is not the case, you can copy the admin.conf file to be accessible by some other user and scp using that other user instead.

The admin.conf file gives the user superuser privileges over the cluster. This file should be used sparingly. For normal users, it's recommended to generate an unique credential to which you grant privileges. You can do this with the kubeadm kubeconfig user --client-name <CN> command. That command will print out a KubeConfig file to STDOUT which you should save to a file and distribute to your user. After that, grant privileges by using kubectl create (cluster)rolebinding.

(Optional) Proxying API Server to localhost

If you want to connect to the API Server from outside the cluster you can use kubectl proxy:

scp root@<control-plane-host>:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf proxy

You can now access the API Server locally at http://localhost:8001/api/v1

Clean up

If you used disposable servers for your cluster, for testing, you can switch those off and do no further clean up. You can use kubectl config delete-cluster to delete your local references to the cluster.

However, if you want to deprovision your cluster more cleanly, you should first drain the node and make sure that the node is empty, then deconfigure the node.

Remove the node

Talking to the control-plane node with the appropriate credentials, run:

kubectl drain <node name> --delete-emptydir-data --force --ignore-daemonsets

Before removing the node, reset the state installed by kubeadm:

kubeadm reset

The reset process does not reset or clean up iptables rules or IPVS tables. If you wish to reset iptables, you must do so manually:

iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

If you want to reset the IPVS tables, you must run the following command:

ipvsadm -C

Now remove the node:

kubectl delete node <node name>

If you wish to start over, run kubeadm init or kubeadm join with the appropriate arguments.

Clean up the control plane

You can use kubeadm reset on the control plane host to trigger a best-effort clean up.

See the kubeadm reset reference documentation for more information about this subcommand and its options.

What's next

Verify that your cluster is running properly with Sonobuoy
See Upgrading kubeadm clusters for details about upgrading your cluster using kubeadm.
Learn about advanced kubeadm usage in the kubeadm reference documentation
Learn more about Kubernetes concepts and kubectl.
See the Cluster Networking page for a bigger list of Pod network add-ons.
See the list of add-ons to explore other add-ons, including tools for logging, monitoring, network policy, visualization & control of your Kubernetes cluster.
Configure how your cluster handles logs for cluster events and from applications running in Pods. See Logging Architecture for an overview of what is involved.

Feedback

For bugs, visit the kubeadm GitHub issue tracker
For support, visit the #kubeadm Slack channel
General SIG Cluster Lifecycle development Slack channel: #sig-cluster-lifecycle
SIG Cluster Lifecycle SIG information
SIG Cluster Lifecycle mailing list: kubernetes-sig-cluster-lifecycle

Version skew policy

While kubeadm allows version skew against some components that it manages, it is recommended that you match the kubeadm version with the versions of the control plane components, kube-proxy and kubelet.

kubeadm's skew against the Kubernetes version

kubeadm can be used with Kubernetes components that are the same version as kubeadm or one version older. The Kubernetes version can be specified to kubeadm by using the --kubernetes-version flag of kubeadm init or the ClusterConfiguration.kubernetesVersion field when using --config. This option will control the versions of kube-apiserver, kube-controller-manager, kube-scheduler and kube-proxy.

Example:

kubeadm is at 1.29
kubernetesVersion must be at 1.29 or 1.28

kubeadm's skew against the kubelet

Similarly to the Kubernetes version, kubeadm can be used with a kubelet version that is the same version as kubeadm or one version older.

Example:

kubeadm is at 1.29
kubelet on the host must be at 1.29, 1.28, 1.27 or 1.26

kubeadm's skew against kubeadm

There are certain limitations on how kubeadm commands can operate on existing nodes or whole clusters managed by kubeadm.

If new nodes are joined to the cluster, the kubeadm binary used for kubeadm join must match the last version of kubeadm used to either create the cluster with kubeadm init or to upgrade the same node with kubeadm upgrade. Similar rules apply to the rest of the kubeadm commands with the exception of kubeadm upgrade.

Example for kubeadm join:

kubeadm version 1.29 was used to create a cluster with kubeadm init
Joining nodes must use a kubeadm binary that is at version 1.29

Nodes that are being upgraded must use a version of kubeadm that is the same MINOR version or one MINOR version newer than the version of kubeadm used for managing the node.

Example for kubeadm upgrade:

kubeadm version 1.28 was used to create or upgrade the node
The version of kubeadm used for upgrading the node must be at 1.28 or 1.29

To learn more about the version skew between the different Kubernetes component see the Version Skew Policy.

Limitations

Cluster resilience

The cluster created here has a single control-plane node, with a single etcd database running on it. This means that if the control-plane node fails, your cluster may lose data and may need to be recreated from scratch.

Workarounds:

Regularly back up etcd. The etcd data directory configured by kubeadm is at /var/lib/etcd on the control-plane node.
Use multiple control-plane nodes. You can read Options for Highly Available topology to pick a cluster topology that provides high-availability.

Platform compatibility

kubeadm deb/rpm packages and binaries are built for amd64, arm (32-bit), arm64, ppc64le, and s390x following the multi-platform proposal.

Multiplatform container images for the control plane and addons are also supported since v1.12.

Only some of the network providers offer solutions for all platforms. Please consult the list of network providers above or the documentation from each provider to figure out whether the provider supports your chosen platform.

Troubleshooting

If you are running into difficulties with kubeadm, please consult our troubleshooting docs.

Last modified November 22, 2023 at 7:23 PM PST: kubeadm: revisit the "Network setup" section post-feedback (c3ddc0b460)